51Թapp

Emeritus Professor Bob Randall

Emeritus Professor Bob Randall

Emeritus Professor
Engineering
Mechanical and Manufacturing Engineering

Bob Randall is a visiting Emeritus Professor in the School of Mechanical and Manufacturing Engineering at the University of New South Wales (UNSW), Sydney, Australia, which he joined in 1988. Prior to that, he worked for the Danish company Brüel & Kjær for 17 years, after ten years’ experience in the chemical and rubber industries in Australia, Canada and Sweden. His book “Frequency Analysis”, published by Brüel & Kjær with the last edition in 1987, was widely distributed. His research and publication record while at Brüel & Kjær was considered PhD equivalent when he joined UNSW. He was promoted to Associate Professor in 1996 and to Professor in 2001, and was made an Emeritus Professor on his retirement in 2008. He has degrees in Mechanical Engineering and Arts (Mathematics, Swedish) from the Universities of Adelaide and Melbourne, respectively. He is the invited author of chapters on vibration measurement and analysis in a number of handbooks and encyclopedias, and a member of the Advisory Board of the leading journal Mechanical Systems and Signal Processing. The second edition of his book Vibration-based Condition Monitoring was published in 2021 by Wiley.  He is the author of more than 280 cited papers in the fields of vibration analysis and machine diagnostics, and has supervised seventeen PhD projects in those areas. He is still active in research.

Phone
9385 6005
Location
Ainsworth Building (J17) Level 4, Room 408A Kensington Campus
  • Books | 2021
    Randall RB, 2021, VIBRATION-BASED CONDITION MONITORING: INDUSTRIAL, AUTOMOTIVE AND AEROSPACE APPLICATIONS, Second Edition,
    Books | 2011
    Randall RB, 2011, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications, John Wiley and Sons Ltd, Chichester, UK,
    Books | 2010
    Vass J; Randall RB; Smid R, 2010, Vibration fault diagnostics for quality control and component reuse, 1, LAP Lambert Academic PublishingGmbH & Co.
    Books | 1987
    Randall RB, 1987, Frequency Analysis, 3, Bruel & Kjaer AS, Copenhagen Denmark
  • Book Chapters | 2022
    Randall RB; Antoni J; Borghesani P, 2022, 'Applied Digital Signal Processing', in Handbook of Experimental Structural Dynamics: With 667 Figures and 70 Tables, pp. 149 - 228,
    Book Chapters | 2022
    Randall RB; Antoni J; Borghesani P, 2022, 'Applied Digital Signal Processing', in Handbook of Experimental Structural Dynamics, Springer New York, pp. 1 - 81,
    Book Chapters | 2020
    Randall RB; Antoni J; Borghesani P, 2020, 'Applied Digital Signal Processing', in Handbook of Experimental Structural Dynamics, Springer New York, pp. 1 - 81,
    Book Chapters | 2019
    Mauricio A; Qi J; Smith W; Randall R; Gryllias K, 2019, 'Vibration Based Condition Monitoring of Planetary Gearboxes Operating Under Speed Varying Operating Conditions Based on Cyclo-non-stationary Analysis', in Mechanisms and Machine Science, Springer, pp. 265 - 279,
    Book Chapters | 2019
    Mauricio A; Smith W; Qi J; Randall R; Gryllias K, 2019, 'Cyclo-non-stationary based bearing diagnostics of planetary gearboxes', in Advances in condition monitoring of machinery in non-stationary operations : proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2018, 20-22 June 2018, Santander, Spain, pp. 343 - 352,
    Book Chapters | 2019
    Peng D; Smith WA; Randall RB, 2019, 'Differentiating Tooth Root Cracks and Spalls in Planet Gears from Changes in the Transmission Error', in Mechanisms and Machine Science, pp. 280 - 289,
    Book Chapters | 2019
    Randall RB; Smith W, 2019, 'A comparison of frequency demodulation methods to determine the instantaneous angular speed of a machine', in Advances in condition monitoring of machinery in non-stationary operations : proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2018, 20-22 June 2018, Santander, Spain, pp. 290 - 299,
    Book Chapters | 2010
    Randall RB, 2010, 'Vibration Analyzers and their use', in Piersol AG; Paez T (ed.), Harris’ Shock and Vibration Handbook, edn. 6, McGraw-Hill, NY, pp. 14.1 - 14.36
    Book Chapters | 2009
    Randall RB, 2009, 'Cepstral Methods of Operational Modal Analysis', in Boller C; Chang F-K; Fujino Y (ed.), Encyclopedia of Structural Health Monitoring, WileyBlackwell,
    Book Chapters | 2008
    Randall RB, 2008, 'Part 1 - Acoustic Signals and Systems Section 3 - Spectral Analysis and Correlation', in Havelock D; Kuwano S; Vorlander M (ed.), Handbook of Signal Processing in Acoustics - Volume 1, edn. Original, Springer, New York, USA, pp. 33 - 52
    Book Chapters | 2007
    Randall RB, 2007, 'Machinery Condition Monitoring', in Crocker M (ed.), Handbook of Noise and Vibration Control, John Wiley and Sons, Hoboken NJ, pp. 575 - 584
    Book Chapters | 2007
    Randall RB, 2007, 'Noise and Vibration Data Analysis', in Crocker M (ed.), , John Wiley and Sons, Hoboken NJ, pp. 549 - 564
    Book Chapters | 2001
    Randall RB, 2001, 'Signal processing vibration analysis', in Ewins DJ; Inman DJ (ed.), Structural Dynamics @ 200: Current Status and Future Directions, edn. Original, Research Studies Press, Baldock, Hertfordshire, England, pp. 287 - 339
  • Journal articles | 2024
    Lu R; Antoni J; Randall RB; Borghesani P; Smith WA; Peng Z, 2024, 'Cepstral operational modal analysis for multiple-input systems based on the real cyclic cepstrum', Mechanical Systems and Signal Processing, 218,
    Journal articles | 2024
    Peng D; Smith WA; Randall RB; Feng K; Peng Z; Teng W; Liu Y, 2024, 'Iterative improvement in tacholess speed estimation using instantaneous error estimation for machine condition monitoring in variable speed', Mechanical Systems and Signal Processing, 216,
    Journal articles | 2024
    Randall RB; Antoni J, 2024, 'Choosing the right signal processing tools for mechanical systems', Mechanical Systems and Signal Processing,
    Journal articles | 2024
    Smith WA; Borghesani P; Randall RB; Antoni J; El Badaoui M; Peng Z, 2024, 'High-speed bearing diagnostics: Observations from the Surveillance 8 Safran contest data', Mechanical Systems and Signal Processing, 216,
    Journal articles | 2023
    Chin ZY; Borghesani P; Smith WA; Randall RB; Peng Z, 2023, 'Monitoring gear wear with transmission error', Wear, 523,
    Journal articles | 2023
    Lu R; Borghesani P; Randall RB; Smith WA; Peng Z, 2023, 'Removal of transfer function effects from gear vibration signals under constant and variable speed conditions', Mechanical Systems and Signal Processing, 184,
    Journal articles | 2023
    Mao Y; Borghesani P; Chin ZY; Randall RB; Peng Z, 2023, 'Extraction and use of frequency-domain relationships between time-varying gear meshing properties and diagnostic measurements', Mechanical Systems and Signal Processing, 190, pp. 110129,
    Journal articles | 2023
    Randall RB; Antoni J, 2023, 'Why EMD and similar decompositions are of little benefit for bearing diagnostics', Mechanical Systems and Signal Processing, 192,
    Journal articles | 2022
    Borghesani P; Smith WA; Randall RB; Antoni J; El Badaoui M; Peng Z, 2022, 'Bearing signal models and their effect on bearing diagnostics', Mechanical Systems and Signal Processing, 174, pp. 109077,
    Journal articles | 2022
    Chin ZY; Borghesani P; Mao Y; Smith WA; Randall RB, 2022, 'Use of transmission error for a quantitative estimation of root-crack severity in gears', Mechanical Systems and Signal Processing, 171,
    Journal articles | 2022
    Feng K; Smith WA; Randall RB; Wu H; Peng Z, 2022, 'Vibration-based monitoring and prediction of surface profile change and pitting density in a spur gear wear process', Mechanical Systems and Signal Processing, 165, pp. 108319,
    Journal articles | 2022
    Hilbert M; Smith WA; Randall RB, 2022, 'The Effect of Signal Propagation Delay on the Measured Vibration in Planetary Gearboxes', Journal of Dynamics, Monitoring and Diagnostics, 1, pp. 9 - 18,
    Journal articles | 2022
    Lu R; Shahriar MR; Borghesani P; Randall RB; Peng Z, 2022, 'Removal of transfer function effects from transmission error measurements using cepstrum-based operational modal analysis', Mechanical Systems and Signal Processing, 165,
    Journal articles | 2022
    Randall RB; Smith WA; Borghesani P; Peng Z, 2022, 'A new angle-domain cepstral method for generalised gear diagnostics under constant and variable speed operation', Mechanical Systems and Signal Processing, 178,
    Journal articles | 2022
    Zhang H; Borghesani P; Randall RB; Peng Z, 2022, 'A benchmark of measurement approaches to track the natural evolution of spall severity in rolling element bearings', Mechanical Systems and Signal Processing, 166,
    Journal articles | 2021
    Chin ZY; Smith WA; Borghesani P; Randall RB; Peng Z, 2021, 'Absolute transmission error: A simple new tool for assessing gear wear', Mechanical Systems and Signal Processing, 146,
    Journal articles | 2021
    Feng K; Smith WA; Borghesani P; Randall RB; Peng Z, 2021, 'Use of cyclostationary properties of vibration signals to identify gear wear mechanisms and track wear evolution', Mechanical Systems and Signal Processing, 150, pp. 107258,
    Journal articles | 2021
    Peng D; Smith WA; Randall RB; Peng Z; Mechefske CK, 2021, 'Speed estimation in planetary gearboxes: A method for reducing impulsive noise', Mechanical Systems and Signal Processing, 159,
    Journal articles | 2021
    Zhang H; Borghesani P; Smith WA; Randall RB; Shahriar MR; Peng Z, 2021, 'Tracking the natural evolution of bearing spall size using cyclic natural frequency perturbations in vibration signals', Mechanical Systems and Signal Processing, 151,
    Journal articles | 2020
    Feng P; Borghesani P; Smith WA; Randall RB; Peng Z, 2020, 'A Review on the Relationships between Acoustic Emission, Friction and Wear in Mechanical Systems', Applied Mechanics Reviews, 72,
    Journal articles | 2020
    Guo J; Randall RB; Borghesani P; Smith WA; Haneef MD; Peng Z, 2020, 'A study on the effects of piston secondary motion in conjunction with clearance joints', Mechanism and Machine Theory, 149,
    Journal articles | 2020
    Mauricio A; Qi J; Smith WA; Sarazin M; Randall RB; Janssens K; Gryllias K, 2020, 'Bearing diagnostics under strong electromagnetic interference based on Integrated Spectral Coherence', Mechanical Systems and Signal Processing, 140,
    Journal articles | 2020
    Mauricio A; Smith WA; Randall RB; Antoni J; Gryllias K, 2020, 'Improved Envelope Spectrum via Feature Optimisation-gram (IESFOgram): A novel tool for rolling element bearing diagnostics under non-stationary operating conditions', Mechanical Systems and Signal Processing, 144,
    Journal articles | 2020
    Randall RB; Smith WA, 2020, 'Detection of faulty accelerometer mounting from response measurements', Journal of Sound and Vibration, 477,
    Journal articles | 2019
    Abboud D; Elbadaoui M; Smith WA; Randall RB, 2019, 'Advanced bearing diagnostics: A comparative study of two powerful approaches', Mechanical Systems and Signal Processing, 114, pp. 604 - 627,
    Journal articles | 2019
    Dackermann U; Smith WA; Alamdari MM; Li J; Randall RB, 2019, 'Cepstrum-based damage identification in structures with progressive damage', Structural Health Monitoring, 18, pp. 87 - 102,
    Journal articles | 2019
    Feng K; Borghesani P; Smith WA; Randall RB; Chin ZY; Ren J; Peng Z, 2019, 'Vibration-based updating of wear prediction for spur gears', Wear, 426-427, pp. 1410 - 1415,
    Journal articles | 2019
    Feng P; Borghesani P; Chang H; Smith WA; Randall RB; Peng Z, 2019, 'Monitoring gear surface degradation using cyclostationarity of acoustic emission', Mechanical Systems and Signal Processing, 131, pp. 199 - 221,
    Journal articles | 2019
    Peng D; Smith WA; Borghesani P; Randall RB; Peng Z, 2019, 'Comprehensive planet gear diagnostics: Use of transmission error and mesh phasing to distinguish localised fault types and identify faulty gears', Mechanical Systems and Signal Processing, 127, pp. 531 - 550,
    Journal articles | 2019
    Peng D; Smith WA; Randall RB; Peng Z, 2019, 'Use of mesh phasing to locate faulty planet gears', Mechanical Systems and Signal Processing, 116, pp. 12 - 24,
    Journal articles | 2019
    Randall RB; Antoni J; Smith WA, 2019, 'A survey of the application of the cepstrum to structural modal analysis', Mechanical Systems and Signal Processing, 118, pp. 716 - 741,
    Journal articles | 2019
    Randall RB; Smith WA, 2019, 'Uses and mis-uses of energy operators for machine diagnostics', Mechanical Systems and Signal Processing, 133,
    Journal articles | 2018
    Randall B; Smith W, 2018, 'Improved cepstral techniques for operational modal analysis', International Journal of Condition Monitoring, 8, pp. 74 - 81
    Journal articles | 2017
    Haneef MD; Randall RB; Smith WA; Peng Z, 2017, 'Vibration and Wear Based Analysis of IC Engine Bearings by Numerical Simulation', Wear,
    Journal articles | 2017
    Shahriar MR; Borghesani P; Randall RB; Tan ACC, 2017, 'An assessment of envelope-based demodulation in case of proximity of carrier and modulation frequencies', Mechanical Systems and Signal Processing, 96, pp. 176 - 200,
    Journal articles | 2016
    Chen J; Randall RB; Peeters B, 2016, 'Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signals', Mechanical Systems and Signal Processing, 75, pp. 434 - 454,
    Journal articles | 2016
    Chen J; Randall RB, 2016, 'Intelligent diagnosis of bearing knock faults in internal combustion engines using vibration simulation', Mechanism and Machine Theory, 104, pp. 161 - 176,
    Journal articles | 2016
    Haneef MD; Randall RB; Peng Z, 2016, 'Wear profile prediction of IC engine bearings by dynamic simulation', Wear, 364-365, pp. 84 - 102,
    Journal articles | 2016
    Hu C; Smith WA; Randall RB; Peng Z, 2016, 'Development of a gear vibration indicator and its application in gear wear monitoring', Mechanical Systems and Signal Processing,
    Journal articles | 2016
    Randall RB; Coats MD; Smith WA, 2016, 'Repressing the effects of variable speed harmonic orders in operational modal analysis', Mechanical Systems and Signal Processing, 79, pp. 3 - 15,
    Journal articles | 2016
    Randall RB, 2016, 'Vibration-based diagnostics of gearboxes under variable speed and load conditions', Meccanica, 51, pp. 3227 - 3239,
    Journal articles | 2016
    Smith WA; Fan Z; Peng Z; Li HUAIZHONG; Randall R, 2016, 'Optimised Spectral Kurtosis for bearing diagnostics under electromagnetic interference', Mechanical Systems and Signal Processing, 75, pp. 371 - 394,
    Journal articles | 2016
    Smith WA; Randall RB, 2016, 'Cepstrum-based operational modal analysis revisited: A discussion on pole-zero models and the regeneration of frequency response functions', Mechanical Systems and Signal Processing, 79, pp. 30 - 46,
    Journal articles | 2015
    Chen J; Bond Randall R; Randall B, 2015, 'Improved automated diagnosis of misfire in internal combustion engines based on simulation models', Mechanical Systems and Signal Processing, 64-65, pp. 58 - 83,
    Journal articles | 2015
    Huynh L; Foster S; Valipour H; Randall R, 2015, 'High strength and reactive powder concrete columns subjected to impact: Experimental investigation', Construction and Building Materials, 78, pp. 153 - 171,
    Journal articles | 2015
    Ruber K; Kanapathipillai K; Randall RB, 2015, 'Sound Transmission Loss of a Panel Backed by a Small Enclosure', Journal of Low Frequency Noise Vibration and Active Control, 34, pp. 549 - 567,
    Journal articles | 2015
    Smith WA; Randall RB, 2015, 'Rolling element bearing diagnostics using the Case Western Reserve University data: a benchmark study', Mechanical Systems and Signal Processing, 64, pp. 100 - 131,
    Journal articles | 2014
    Chen J; Bond Randall R, 2014, 'Improved automated diagnosis of misfire in internal combustion engines based on simulation models', Mechanical Systems and Signal Processing,
    Journal articles | 2014
    Chen J; Randall R; Feng N; Peeters B; Van Der Auweraer H, 2014, 'Modelling and diagnosis of big-end bearing knock fault in internal combustion engines', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, pp. 2973 - 2984,
    Journal articles | 2014
    Coats MD; Randall RB, 2014, 'Single and multi-stage phase demodulation based order-tracking', Mechanical Systems and Signal Processing, 44, pp. 86 - 117,
    Journal articles | 2014
    Dackermann U; Smith WA; Randall RB, 2014, 'Damage identification based on response-only measurements using cepstrum analysis and artificial neural networks', Structural Health Monitoring, 13, pp. 430 - 444,
    Journal articles | 2014
    Ruber K; Kanapathipillai S; Randall R, 2014, 'Sound Transmission Loss of Panel Backed by a Small Enclosure', Journal of Low Frequency Noise Vibration and Active Control,
    Journal articles | 2014
    Rémond D; Antoni J; Randall RB, 2014, 'Editorial for the special issue on Instantaneous Angular Speed (IAS) processing and angular applications', Mechanical Systems and Signal Processing, 44, pp. 1 - 4,
    Journal articles | 2014
    Rémond D; Antoni J; Randall RB, 2014, 'Instantaneous Angular Speed (IAS) processing and related angular applications', Mechanical Systems and Signal Processing, 45, pp. 24 - 27,
    Journal articles | 2014
    Sawalhi N; Randall RB; Forrester D, 2014, 'Separation and enhancement of gear and bearing signals for the diagnosis of wind turbine transmission systems', Wind Energy, 17, pp. 729 - 743,
    Journal articles | 2014
    Sawalhi N; Randall RB, 2014, 'Gear parameter identification in a wind turbine gearbox using vibration signals', Mechanical Systems and Signal Processing, 42, pp. 368 - 376,
    Journal articles | 2013
    Borghesani P; Pennacchi P; Randall RB; Sawalhi N; Ricci R, 2013, 'Application of cepstrum pre-whitening for the diagnosis of bearing faults under variable speed conditions', Mechanical Systems and Signal Processing, 36, pp. 370 - 384,
    Journal articles | 2013
    Chen J; Randall R; Feng N; Peeters B; Van Der Auweraer H, 2013, 'Automated diagnosis system for mechanical faults in IC engines', 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013, 2, pp. 892 - 903
    Journal articles | 2013
    Forbes G; Randall RB, 2013, 'Estimation of Turbine Blade Natural Frequencies from Casing Pressure and Vibration Measurements', Mechanical Systems and Signal Processing, 36, pp. 549 - 561,
    Journal articles | 2012
    Alshroof O; Forbes GL; Sawalhi N; Randall RB; Yeoh GH, 2012, 'Computational Fluid Dynamic Analysis of a Vibrating Turbine Blade', International Journal of Rotating Machinery, 2012, pp. 1 - 15,
    Journal articles | 2012
    Borghesani P; Pennacchi P; Randall RB; Ricci R, 2012, 'Order tracking for discrete-random separation in variable speed conditions', Mechanical Systems and Signal Processing, 30, pp. 1 - 22,
    Journal articles | 2012
    Chen J; Randall RB; Peeters B; Desmet W; Van Der Auweraer HD, 2012, 'Artificial neural network based fault diagnosis of IC engines', Key Engineering Materials, 518, pp. 47 - 56,
    Journal articles | 2012
    Chen J; Randall RB; Peeters B; Van Der Auweraer HD; Desmet W, 2012, 'Automated misfire diagnosis in engines using torsional vibration and block rotation', Journal of Physics: Conference series, 364, pp. 1 - 12,
    Journal articles | 2012
    Coats MD; Randall RB, 2012, 'Order-Tracking with and without a tacho signal for gear fault diagnostics', Australian Acoustical Society Conference 2012, Acoustics 2012: Acoustics, Development, and the Environment, pp. 447 - 454
    Journal articles | 2012
    Deshpande L; Randall RB; Sawalhi N, 2012, 'Improved simulation of bearing faults using a Finite Element Model reduction technique', 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, 2, pp. 816 - 826
    Journal articles | 2012
    Deshpande L; Sawalhi N; Randall RB, 2012, 'Gearbox bearing fault simulation using a finite element model reduction technique.', Journal of Physics: Conference series, 364, pp. 1 - 12,
    Journal articles | 2011
    Deshpande L; Sawalhi N; Randall RB, 2011, 'Gearbox fault simulation using finite element model reduction technique', Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 322 - 328
    Journal articles | 2011
    Deshpande L; Sawalhi N; Randall RB, 2011, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', Australian Journal of Mechanical Engineering, 8, pp. 91 - 101,
    Journal articles | 2011
    Forbes GL; Alshroof O; Randall RB, 2011, 'Fluid-structure interaction study of gas turbine blade vibrations', Australian Journal of Mechanical Engineering, 8, pp. 143 - 150,
    Journal articles | 2011
    Randall RB; Antoni J, 2011, 'Rolling element bearing diagnostics-A tutorial', Mechanical Systems and Signal Processing, 25, pp. 485 - 520,
    Journal articles | 2011
    Randall RB; Sawalhi N; Coats M, 2011, 'A comparison of methods for separation of deterministic and random signals', The International Journal of Condition Monitoring, 1, pp. 11 - 19
    Journal articles | 2011
    Randall RB; Sawalhi N, 2011, 'A new method for separating discrete components from a signal', Sound and Vibration, 45, pp. 6 - 9
    Journal articles | 2011
    Sawalhi N; Randall RB, 2011, 'Vibration response of spalled rolling element bearings: Observations, simulations and signal processing techniques to track the spall size', Mechanical Systems and Signal Processing, 25, pp. 846 - 870,
    Journal articles | 2011
    Urbanek J; Barszcz T; Sawalhi N; Randall RB, 2011, 'Comparison of amplitude-based and phase-based methods for speed tracking in application to wind turbines', Metrology and Measuring Systems, 18, pp. 295 - 304,
    Journal articles | 2010
    Coats MD; Randall RB, 2010, 'Single record order-tracking', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 47 - 58
    Journal articles | 2010
    Desbazeille M; Randall RB; Guillet F; El Badaoui M; Hoisnard C, 2010, 'Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft', Mechanical Systems and Signal Processing, 24, pp. 1529 - 1541,
    Journal articles | 2010
    Liu X; Cardoso J-F; Randall RB, 2010, 'Very fast blind source separation by signal to noise ratio based stopping threshold for the SHIBBS/SJAD algorithm', Mechanical Systems and Signal Processing, 24, pp. 2096 - 2103,
    Journal articles | 2010
    Randall RB, 2010, 'Cepstrum analysis for machine diagnostics and operational modal analysis - A tutorial', Technical Program for the MFPT 2010 Conference - Transition: From R and D to Product
    Journal articles | 2010
    Sawalhi N; Randall RB, 2010, 'Improved simulations for fault size estimation in rolling element bearings', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 656 - 667
    Journal articles | 2010
    Sawalhi N; Randall RB, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, 2, pp. 1278 - 1284
    Journal articles | 2010
    Vass J; Randall RB; Kara S; Kaebernick H, 2010, 'Vibration-based approach to lifetime prediction of electric motors for reuse', International Journal of Sustainable Manufacturing, 2, pp. 2 - 29,
    Journal articles | 2009
    Barszcz T; Randall RB, 2009, 'Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine', Mechanical Systems and Signal Processing, 23, pp. 1352 - 1365
    Journal articles | 2009
    Endo H; Randall RB; Gosselin C, 2009, 'Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation', Mechanical Systems and Signal Processing, 23, pp. 636 - 651
    Journal articles | 2009
    Forbes GL; Randall RB, 2009, 'Gas turbine casing vibrations under blade pressure excitation', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology
    Journal articles | 2009
    Randall RB, 2009, 'New signal processing techniques for advanced machine diagnostics and prognostics', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology
    Journal articles | 2009
    Randall RB, 2009, 'Rolling element bearing diagnostics - A tutorial', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology
    Journal articles | 2009
    Randall RB, 2009, 'The Application of Fault Simulation to Machine Diagnostics and Prognostics', International Journal of Acoustics and Vibration, 14, pp. 81 - 89
    Journal articles | 2009
    Randall RB, 2009, 'The application of fault simulation to machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 8, pp. 5042 - 5055
    Journal articles | 2009
    Randall RB, 2009, 'The present state and future developments in machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 7, pp. 4101 - 4108
    Journal articles | 2009
    Yokohama H; Randall RB, 2009, 'Investigation of road surface roughness effect on tread rubber friction with FEA', SAE Technical Papers,
    Journal articles | 2009
    Zhang Y; Randall RB, 2009, 'Rolling element bearing fault diagnosis based on the combination of genetic algorithms and fast kurtogram', Mechanical Systems and Signal Processing, 23, pp. 1509 - 1517,
    Journal articles | 2008
    Forbes GL; Randall RB, 2008, 'Resonance phenomena of an elastic ring under a moving load', Journal of Sound and Vibration, 318, pp. 991 - 1004
    Journal articles | 2008
    Hanson D; Randall RB; Brown G; Emslie R, 2008, 'Locating leaks in underground water pipes using the complex cepstrum', Australian Journal of Mechanical Engineering, 6, pp. 107 - 112
    Journal articles | 2008
    Hanson DJ; Winton M; Randall RB; Ford RA; Thompson DJ; Waters T; Antoni JE, 2008, 'An in-service dynamic model of a diesel railcar from operational modal analysis and finite-element model updating', Proceedings of the Institution of Mechanical Engineers Part F - Journal of Rail and Rapid Transit, 222, pp. 313 - 320
    Journal articles | 2008
    Liu X; Randall RB; Antoni JE, 2008, 'Blind separation of internal combustion engine vibration signals by a deflation method', Mechanical Systems and Signal Processing, 22, pp. 1082 - 1091,
    Journal articles | 2008
    Sawalhi N; Randall RB, 2008, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Australian Journal of Mechanical Engineering, 5, pp. 157 - 168
    Journal articles | 2008
    Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1924 - 1951,
    Journal articles | 2008
    Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part II: Simulation of the vibrations produced by extended bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1952 - 1966,
    Journal articles | 2008
    Vass J; Smid R; Randall RB; Sovka P; Cristalli C; Torcianti B, 2008, 'Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: Application to mechanical fault diagnostics', Mechanical Systems and Signal Processing, 22, pp. 647 - 671,
    Journal articles | 2007
    Antoni J; Hanson DJ; Randall RB, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis.', Key Engineering Materials, 347, pp. 473 - 478
    Journal articles | 2007
    Endo H; Randall RB, 2007, 'Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter', Mechanical Systems and Signal Processing, 21, pp. 906 - 919
    Journal articles | 2007
    Hanson DJ; Randall RB; Antoni J; Thompson DJ; Waters T; Ford RA, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of mimo systems - Part 1: modal parameter identification.', Mechanical Systems and Signal Processing, 21, pp. 2441 - 2458
    Journal articles | 2007
    Hanson DJ; Randall RB; Antoni J; Waters T; Thompson DJ; Ford RA, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of momo systems - Part II: obtaining scaled mode shapes through finite element model updating.', Mechanical Systems and Signal Processing, 21, pp. 2459 - 2473
    Journal articles | 2007
    Hanson DJ; Waters T; Thompson DJ; Randall RB; Ford RA, 2007, 'The role of anti-resonance frequencies from operational modal analysis in finite element model updating', Mechanical Systems and Signal Processing, 21, pp. 74 - 97,
    Journal articles | 2007
    Sawalhi N; Randall RB; Endo H, 2007, 'The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis.', Mechanical Systems and Signal Processing, 21, pp. 2616 - 2633
    Journal articles | 2007
    Yokohama H; Hall SD; Randall RB, 2007, 'Experimental and theoretical studies of rubber properties; The application to tyre tread rubber', SAE Technical Papers,
    Journal articles | 2006
    Hanson D; Randall RB; Antoni J; Umlauff M; McDonald J; Ford RAJ, 2006, 'Operational modal analysis of the saker race car with engine as excitation', 13th International Congress on Sound and Vibration 2006, ICSV 2006, 3, pp. 1898 - 1905
    Journal articles | 2006
    Randall RB; Antoni J, 2006, 'The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines', Mechanical Systems and Signal Processing, 20, pp. 308 - 331
    Journal articles | 2006
    Sawalhi N; Randall RB, 2006, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Proceedings of the 1st World Congress on Engineering Asset Management, WCEAM 2006, pp. 724 - 737,
    Journal articles | 2005
    Antoni J; Randall RB, 2005, 'On the use of the cyclic power spectrum in rolling element bearings diagnostics', Journal of Sound and Vibration, 281, pp. 463 - 468,
    Journal articles | 2005
    Bonnardot F; El Badaoui M; Randall RB; Daniere J; Guillet F, 2005, 'Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation)', Mechanical Systems and Signal Processing, 19, pp. 766 - 785
    Journal articles | 2005
    Bonnardot F; Randall RB; Guillet F, 2005, 'Extraction of second-order cyclostationary sources--Application to vibration analysis', Mechanical Systems and Signal Processing, 19, pp. 1230 - 1244,
    Journal articles | 2005
    Hanson D; Randall RB; Ford RAJ; Antoni J; Thompson DJ; Waters TP, 2005, 'Blind system identification using cyclostationarity and the complex cepstrum', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 1, pp. 447 - 450,
    Journal articles | 2005
    Liu X; Randall RB, 2005, 'Blind source separation of internal combustion engine piston slap from other measured vibration signals', Mechanical Systems and Signal Processing, 19, pp. 1196 - 1208,
    Journal articles | 2005
    Liu X; Randall RB, 2005, 'Redundant data elimination in independent component analysis', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 1, pp. 29 - 32,
    Journal articles | 2005
    Sawalhi N; Randall RB, 2005, 'Spectral kurtosis optimization for rolling element bearings', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 2, pp. 839 - 842,
    Journal articles | 2004
    Antoni JE; Randall RB, 2004, 'Unsupervised noise cancellation for vibration signals: part 1 - evaluation of adaptive algorithms', Mechanical Systems and Signal Processing, 18, pp. 89 - 101
    Journal articles | 2004
    Antoni JE; Randall RB, 2004, 'Unsupervised noise cancellation for vibration signals: part II - a novel frequency-domain algorithm', Mechanical Systems and Signal Processing, 18, pp. 103 - 117
    Journal articles | 2004
    Bonnardot F; Randall RB; Antoni J, 2004, 'Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis', International Journal of Acoustics and Vibration, 9, pp. 51 - 60
    Journal articles | 2004
    Endo H; Randall RB; Gosselin C, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region', Journal of Failure Analysis and Prevention, 4, pp. 63 - 71,
    Journal articles | 2004
    Endo H; Randall RB; Gosselin C, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region.', Journal of Failure Analysis and Prevention, 4, pp. 57 - 65
    Journal articles | 2004
    Randall RB, 2004, 'Detection and diagnosis of incipient bearing failure in helicopter gearboxes', Engineering Failure Analysis, 11, pp. 177 - 190
    Journal articles | 2004
    Randall RB, 2004, 'State of the art in monitoring rotating machinery - Part 1', Sound and Vibration, 38, pp. 14 - 21
    Journal articles | 2004
    Randall RB, 2004, 'State of the art in monitoring rotating machinery - Part 2', Sound and Vibration, 38, pp. 10 - 17
    Journal articles | 2003
    Antoni JE; Randall RB, 2003, 'A stochastic model for simulation and diagnostics of rolling element bearings with localized faults', Journal of Vibration and Acoustics - Transactions of the ASME, 125, pp. 282 - 289
    Journal articles | 2002
    Antoni J; Daniere J; Guillet F; Randall RB, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', JOURNAL OF SOUND AND VIBRATION, 257, pp. 839 - 856,
    Journal articles | 2002
    Antoni J; Daniere J; Guillet F; Randall RB, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', Journal of Sound and Vibration, 257, pp. 839 - 856,
    Journal articles | 2002
    Antoni JE; Randall RB, 2002, 'Differential diagnosis of gear and bearing faults', Journal of Vibration and Acoustics - Transactions of the ASME, 124(2), pp. 165 - 171
    Journal articles | 2001
    Randall RB; Antoni JE; Chobsaard S, 2001, 'The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals.', Mechanical Systems and Signal Processing, 15, pp. 945 - 962
    Journal articles | 2001
    Randall RB, 2001, 'Editorial for special edition on gear and bearing diagnostics', Mechanical Systems and Signal Processing, 15, pp. 827 - 829
    Journal articles | 2000
    Gao Y; Randall RB, 2000, 'The ITD mode-shape coherence and confidence factor and its application to separating eigenvalue positions in the Z-plane', Mechanical Systems and Signal Processing, 14, pp. 167 - 180
    Journal articles | 2000
    Ho D; Randall RB, 2000, 'Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals', Mechanical Systems and Signal Processing, 14, pp. 763 - 788
    Journal articles | 2000
    Hosseini MM; Kerr RM; Randall RB, 2000, 'An inspection model with minimal and major maintenance for a system with deterioration and Poisson failures', IEEE TRANSACTIONS ON RELIABILITY, 49, pp. 88 - 98,
    Journal articles | 2000
    Randall RB; Gao Y, 2000, 'A simulation model for training neural networks to recognise bearing faults', Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA, pp. 247 - 254
    Journal articles | 1999
    Gao Y; Randall RB, 1999, 'Reconstruction of diesel engine cylinder pressure using a time domain smoothing technique', Mechanical Systems and Signal Processing, 13, pp. 709 - 722
    Journal articles | 1999
    Hosseini MM; Kerr RM; Randall RB, 1999, 'A hybrid maintenance model with imperfect inspection for a system with deterioration and poisson failure', Journal of the Operational Research Society, 50, pp. 1229 - 1243,
    Journal articles | 1999
    Ren Y; Randall RB; Milton BE, 1999, 'Influence of the resonant frequency on the control of knock in diesel engines', Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, pp. 127 - 133
    Journal articles | 1998
    Du S; Randall RB; Kelly DW, 1998, 'Modelling of spur gear mesh stiffness and static transmission error', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 287 - 297
    Journal articles | 1998
    Du S; Randall RB, 1998, 'Encoder error analysis in gear transmission error measurement', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 277 - 285
    Journal articles | 1998
    Gao Y; Randall RB; Ford RA, 1998, 'Estimation of envelope spectra using maximum entropy spectral analysis and spectrum interpolation - application to diagnosing bearing defects from short time recordings', International Journal of COMADEM, 1, pp. 15 - 22
    Journal articles | 1998
    Randall RB; Ho D; Gao Y, 1998, 'Bearing diagnostics by digital analysis techniques in high background noise situations', Proceedings of the 23rd International Conference on Noise and Vibration Engineering, ISMA, pp. 323 - 330
    Journal articles | 1998
    Zurita G; Ågren A; Randall RB; Gao Y, 1998, 'Reconstruction of cylinder pressure time trace on a six-cylinder engine from acceleration measurements', Proceedings of the 23rd International Conference on Noise and Vibration Engineering, ISMA, pp. 331 - 337
    Journal articles | 1997
    Randall RB, 1997, 'Advanced machine diagnostics', The Shock and Vibration Digest, 29, pp. 6 - 30,
    Journal articles | 1996
    Gao Y; Ford RA; Randall RB, 1996, 'Multiple carrier demodulation of amplitude modulations by rectification - application to the detection of mechanical faults in rotating machines', Mechanical Engineering Transactions, pp. 137 - 145
    Journal articles | 1996
    Gao Y; Randall RB, 1996, 'Determination of frequency response functions from response measurements - I. Extraction of poles and zeros from response cepstra', Mechanical Systems and Signal Processing, 10, pp. 293 - 317
    Journal articles | 1996
    Gao Y; Randall RB, 1996, 'Determination of frequency response functions from response measurements - II. Regeneration of frequency response functions from poles and zeros', Mechanical Systems and Signal Processing, 10, pp. 319 - 340
    Journal articles | 1996
    Li YJ; Randall RB, 1996, 'Prediction of the transient response of a shell by dynamic Green`s function', Mechanical Engineering Transactions, pp. 157 - 162
    Journal articles | 1996
    Sweeney PJ; Randall RB, 1996, 'Gear transmission error measurement using phase demodulation', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 201 - 213
    Journal articles | 1994
    Randall RB; Gao Y; Sestieri A, 1994, 'Phantom zeros in curve-fitted frequency response functions', Mechanical Systems and Signal Processing, 8, pp. 607 - 622,
    Journal articles | 1994
    Randall RB; Gao Y, 1994, 'Extraction of modal parameters from the response power cepstrum', Journal of Sound and Vibration, 176, pp. 179 - 193,
    Journal articles | 1990
    Randall RB, 1990, 'Introduction to condition monitoring', Acoustics Australia, 18, pp. 15 - 18
    Journal articles | 1985
    Randall RB, 1985, 'COMPUTER AIDED VIBRATION SPECTRUM TREND ANALYSIS FOR CONDITION MONITORING.', Maintenance management international, 5, pp. 161 - 167
    Journal articles | 1984
    Randall RB, 1984, 'Computer aided vibration spectrum trend analysis for condition monitoring.',
    Journal articles | 1984
    Randall RB, 1984, 'Computer aided vibration spectrum trend analysis for condition monitoring.', Computer aided vibration spectrum trend analysis for condition monitoring.
    Journal articles | 1984
    Randall RB, 1984, 'Machine health monitoring by analysis of accelerometer-derived signals.', Machine health monitoring by analysis of accelerometer-derived signals.
    Journal articles | 1984
    Randall RB, 1984, 'Machine health monitoring by analysis of accelerometer-derived signals.', Machine health monitoring by analysis of accelerometer-derived signals.
    Journal articles | 1984
    Randall RB, 1984, 'Separating excitation and structural response effects in gearboxes.',
    Journal articles | 1984
    Randall RB, 1984, 'Separating excitation and structural response effects in gearboxes.', Separating excitation and structural response effects in gearboxes.
    Journal articles | 1983
    Randall RB, 1983, 'The application of cepstrum analysis to machine diagnostics.',
    Journal articles | 1983
    Randall RB, 1983, 'The application of cepstrum analysis to machine diagnostics.', The application of cepstrum analysis to machine diagnostics.
    Journal articles | 1982
    Randall RB, 1982, 'A new method of modeling gear faults', Journal of Mechanical Design, Transactions of the ASME, 104, pp. 259 - 267,
    Journal articles | 1982
    Randall RB, 1982, 'CEPSTRUM ANALYSIS AND GEARBOX FAULT DIAGNOSIS.', Maintenance Management International, 3, pp. 183 - 208
    Journal articles | 1981
    Randall RB; Hee J, 1981, 'CEPSTRUM ANALYSIS.', Technical review - Bruel & Kjaer English ed., pp. 3 - 44
    Journal articles | 1981
    Randall RB, 1981, 'COMPUTER ASSISTED INCIPIENT FAULT DETECTION ON ROTATING AND RECIPROCATING MACHINES.', Noise & Vibration Control Worldwide, 12, pp. 230 - 234
    Journal articles | 1981
    Randall RB, 1981, 'NEW METHOD OF MODELING GEAR FAULTS.', American Society of Mechanical Engineers (Paper)
    Journal articles | 1981
    Randall RB, 1981, 'NEW METHOD OF MODELING GEAR FAULTS.', American Society of Mechanical Engineers (Paper)
    Journal articles | 1980
    Randall RB, 1980, 'ADVANCES IN THE APPLICATION OF CEPSTRUM ANALYSIS TO GEARBOX DIAGNOSIS.', Institution of Mechanical Engineers, Conference Publications, pp. 169 - 174
    Journal articles | 1975
    Randall RB, 1975, 'GEARBOX FAULT DIAGNOSIS USING CEPSTRUM ANALYSIS.', World Congr on the Theory of Mach and Mech, 4th, pp. 169 - 174
    Journal articles | 1975
    Randall RB, 1975, 'VIBRATION SIGNATURE ANALYSIS - TECHNIQUES AND INSTRUMENT SYSTEMS.', Noise Control Vib Reduct, 6, pp. 81 - 89
    Journal articles | 1974
    Randall RB, 1974, 'VIBRATION SIGNATURE ANALYSIS - TECHNIQUES AND INSTRUMENT SYSTEMS.', VIBRATION SIGNATURE ANALYSIS - TECHNIQUES AND INSTRUMENT SYSTEMS., pp. 445 - 455
  • Conference Papers | 2024
    Daman A; Smith WA; Mao Y; Randall RB; Peng Z, 2024, 'Detection of Multiple Cracks in Gears using Transmission Error', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 173 - 182
    Conference Papers | 2024
    Mao Y; Chin ZY; Smith W; Randall R; Peng Z; Borghesani P, 2024, 'Evaluation of transmission error for gear diagnostics', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 235 - 243
    Conference Papers | 2022
    Antoni J; Smith W; Randall RB, 2022, 'On the design of informative decompositions', in Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, pp. 559 - 570
    Conference Papers | 2022
    Smith WA; Borghesani P; Abboud D; Randall RB; Antoni J; El Badaoui M; Peng Z, 2022, 'A new look at bearing signal models', in Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, pp. 592 - 602
    Conference Papers | 2020
    Chen Y; Feng K; Randall RB; Borghesani P; Zuo MJ, 2020, 'Use of Autoregressive Conditional Heteroskedasticity Model to Assess Gear Tooth Surface Roughness', in 2020 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling, APARM 2020,
    Conference Papers | 2020
    Randall RB; Smith WA, 2020, 'Bearing diagnostics in variable speed gearboxes', in Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics, pp. 569 - 580
    Conference Papers | 2018
    Mauricio A; Qi J; Gryllias K; Janssens K; Sarrazin M; Smith W; Randall R, 2018, 'Cyclostationary-based bearing diagnostics under electromagnetic interference', in 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling, Hiroshima, Japan, pp. 2860 - 2867, presented at 25th International Congress on Sound and Vibration, Hiroshima, Japan, 08 July 2018 - 12 July 2018,
    Conference Papers | 2018
    Mauricio A; Smith W; Randall R; Antoni J; Gryllias K, 2018, 'Cyclostationary-based tools for bearing diagnostics', in Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics, pp. 905 - 918
    Conference Papers | 2018
    Peng D; Smith WA; Randall RB, 2018, 'Locating faulty planet gears using external vibration measurements', in 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018, The British Institute of NDT, Nottingham, UK, pp. 330 - 338, presented at Fifteenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM2018 / MFPT2018), Nottingham, UK, 10 September 2018 - 12 September 2018,
    Conference Papers | 2018
    Randall RB; Smith WA, 2018, 'Detection of faulty accelerometer mounting', in Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics, pp. 761 - 767
    Conference Papers | 2017
    Crivelli D; Hutt S; Clarke A; Borghesani P; Peng Z; Randall R, 2017, 'Condition monitoring of rotating machinery with acoustic emission: a British-Australian collaboration', in ational Conference on Vibration Engineering and Technology of Machinery, Springer Nature, Brisbane, Australia, pp. 119 - 128, presented at 12 th World Congress on Engineering Asset Management & 13 th International Conference on Vibration Engineering and Technology of Machinery, Brisbane, Australia, 02 August 2017 - 04 August 2017,
    Conference Papers | 2017
    Haneef MD; Randall RB; Smith WA; Peng Z, 2017, 'Integrated Approach for Health Assessment of IC Engine Bearings through Numerical Simulation', Melbourne, Australia, presented at Tenth DST Group International Conference on Health and Usage Monitoring Systems (HUMS), Melbourne, Australia, 26 February 2017 - 28 February 2017,
    Conference Papers | 2017
    Peng D; Smith W; Randall R; Peng Z, 2017, 'Development of an indicator to locate faults on planet gears', Portugal, presented at International Conference on Structural Engineering Dynamics ICEDyn 2017, Portugal, 03 July 2017 - 05 August 2017
    Conference Papers | 2017
    Randall RB; Smith WA, 2017, 'Application of the Teager Kaiser Energy Operator to Machine Diagnostics', Melbourne, Australia, presented at Tenth DST Group International Conference on Health and Usage Monitoring Systems (HUMS), Melbourne, Australia, 26 February 2017 - 28 February 2017,
    Conference Papers | 2017
    Randall RB; Smith WA, 2017, 'New cepstral techniques for operational modal analysis', in WCCM 2017 - 1st World Congress on Condition Monitoring 2017
    Conference Papers | 2017
    Smith W; Randall RB; Hu C; Peng Z, 2017, 'Cepstral removal of resonance effects to improve the use of traditional gear diagnostic indicators at different speeds', London, UK, presented at First World Congress on Condition Monitoring, London, UK, 13 June 2017 - 16 June 2017
    Conference Papers | 2017
    Smith WA; Randall RB; de Chasteigner du Mée X; Peng Z, 2017, 'Use of Cyclostationary Properties to Diagnose Planet Bearing Faults in Variable Speed Conditions', Melbourne, Australia, presented at Tenth DST Group International Conference on Health and Usage Monitoring Systems (HUMS), Melbourne, Australia, 26 February 2017 - 28 February 2017,
    Conference Papers | 2017
    Zhang X; Smith W; Borghesani P; Peng Z; Randall R, 2017, 'Use of cyclostationarity to detect changes in gear surface roughness using vibration measurements', in Proceedings of the 12th World Congress on Engineering Asset Management & the 13th International Conference on Vibration Engineering and Technology of Machinery, Springer Nature, Brisbane, pp. 763 - 771, presented at The 12th World Congress on Engineering Asset Management and 13th International Conference on Vibration Engineering and Technology of Machinery, Brisbane, 02 August 2017 - 04 August 2017,
    Conference Papers | 2016
    Randall R; Smith W, 2016, 'New cepstral methods for the diagnosis of gear and bearing faults under variable speed conditions', in ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics, Athens, Greece, presented at 23rd International Congress on Sound and Vibration, Athens, Greece, 10 July 2016 - 14 July 2016
    Conference Papers | 2016
    Randall R, 2016, 'Modern Envelope analysis for bearing diagnostics', in International Journal of COMADEM, pp. 5 - 11
    Conference Papers | 2016
    Randall RB; Antoni J, 2016, 'Alternatives to kurtosis as an indicator of rolling element bearing faults', in Sas P (ed.), ISMA2016, Leuven Belgium, presented at ISMA2016, Leuven Belgium, 17 September 2016 - 19 September 2016,
    Conference Papers | 2016
    Randall RB; Smith WA, 2016, 'Compensating for speed change in the diagnosis of gear and bearing faults', in Advances in Technology to Support End User Mission - Proceedings of the 2016 Joint Conference/Symposium of the Society for Machinery Failure Prevention Technology and the International Society of Automation
    Conference Papers | 2016
    Randall RB; Smith WA, 2016, 'Use of the Teager Kaiser Energy Operator to estimate machine speed', in Third European Conference of the Prognostics and Health Management Society 2016, Bilbao, Spain, presented at 3rd European Conference of the PHM Society, Bilbao, Spain, 05 July 2016 - 08 July 2016
    Conference Papers | 2016
    Randall RB, 2016, 'A new interpretation of the Teager Kaiser energy operator', in Vibrations in Rotating Machinery, 11th International Conference on Vibrations in Rotating Machinery, Manchester, UK, presented at 11th International Conference on Vibrations in Rotating Machinery, Manchester, UK, 13 September 2016 - 15 September 2016
    Conference Papers | 2016
    Smith WA; Fan Z; Peng D; Peng Z; Randall RB, 2016, 'Electromagnetic interference in vibration signals and its effect on bearing diagnostics', in VIRM 11 - Vibrations in Rotating Machinery, Institution of Mechanical Engineers, Manchester, UK, pp. 523 - 533, presented at 11th International Conference on Vibrations in Rotating Machinery, Manchester, UK, 13 September 2016 - 15 September 2016
    Conference Papers | 2015
    Chen J; Randall RB, 2015, 'Model based automated diagnosis of bearing knock faults in internal combustion engines', in Mechanisms and Machine Science, pp. 497 - 507,
    Conference Papers | 2015
    Coats MD; Randall RB, 2015, 'Order tracking under run-up and run-down conditions', in Mechanisms and Machine Science, pp. 409 - 420,
    Conference Papers | 2015
    Haneef MD; randall RB; PENG Z, 2015, 'Dynamic Simulation of IC Engine Bearings for Fault Detection and Wear Prediction', in International Science Index, 17 (11) Part II, Venice, Italy, presented at 17th International conference on tribology and interface engineering, Venice, Italy, 09 November 2015 - 10 November 2015,
    Conference Papers | 2015
    Randall R; Coats M; Smith WA, 2015, 'Determining the speed of a variable speed wind turbine from the vibration response', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at Acoustics 2015, Hunter Valley, Australia, 15 November 2015 - 18 November 2015,
    Conference Papers | 2015
    Randall RB, 2015, 'Blind enhancement of modal information in time signals using the real cepstrum', in Joint Conference: MFPT 2015 and ISA's 61st International Instrumentation Symposium - Technology Evolution: Sensors to Systems for Failure Prevention
    Conference Papers | 2015
    Randall RB, 2015, 'Envelope analysis - A tutorial', in Joint Conference: MFPT 2015 and ISA's 61st International Instrumentation Symposium - Technology Evolution: Sensors to Systems for Failure Prevention
    Conference Papers | 2015
    Siew WS; Smith WA; Peng Z; Randall RB, 2015, 'Fault severity trending in rolling element bearings', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at Acoustics 2015, Hunter Valley, Australia, 15 November 2015 - 18 November 2015
    Conference Papers | 2015
    Yang Y; Smith WA; Borghesani P; Peng Z; Randall R, 2015, 'Detecting changes in gear surface roughness using vibration signals', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at Acoustics 2015, Hunter Valley, Australia, 15 November 2015 - 18 November 2015,
    Conference Papers | 2015
    Randall RB; Coats M; Smith W, 2015, 'Operational Modal Analysis in the Presence of Variable Speed Harmonic Orders'
    Conference Papers | 2015
    Smith WA; Randall R, 2015, 'On the use of pole-zero models in cepstrum-based operational modal analysis: regeneration of frequency response functions'
    Conference Papers | 2014
    Coats MD; Randall RB, 2014, 'Order tracking under run-up and run-down conditions', in MFPT 2014 Conference: Technology Solutions for Affordable Sustainment
    Conference Papers | 2014
    Coats MD; Randall RB, 2014, 'Removal of shaft speed related components from the response signals of a machine with varying speed prior to operational modal analysis', in INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control
    Conference Papers | 2014
    Dackermann U; Smith WA; Li J; Randall RB, 2014, 'On the use of the cepstrum and artificial neural networks to identify structural mass changes from response-only measurements', Leuven, Belgium, pp. 3739 - 3750, presented at International Conference on Noise and Vibration Engineering, Leuven, Belgium, 15 September 2014 - 10 September 2014
    Conference Papers | 2014
    Deshpande LG; Randall RB; Smith WA, 2014, 'Diagnostics of planet gear faults from the effects of meshing with the ring and sun gears', Beijing, China, presented at The 21st International Congress on Sound and Vibration, Beijing, China, 13 July 2014 - 17 July 2014
    Conference Papers | 2014
    Deshpande LG; Smith WA; Randall RB, 2014, 'Condition monitoring of planetary gearboxes: modelling mesh stiffness in the presence of planet gear tooth root cracks', in The 8th Australasian Congress on Applied Mechanics 2014, presented at 8th Australasian Congress on Applied Mechanics, 23 November 2014 - 26 November 2014
    Conference Papers | 2014
    Randall RB; Coats MD; Smith WA, 2014, 'Gear diagnostics under widely varying speed conditions', Lyon, France, presented at 4th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, Lyon, France, 15 December 2014 - 16 December 2014
    Conference Papers | 2014
    Randall RB; Coats MD; Smith WA, 2014, 'Improvement in the diagnostics of gearbox vibration signals under varying speed conditions', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, presented at 8th Australasian Congress on Applied Mechanics, 23 November 2014 - 26 November 2014
    Conference Papers | 2014
    Randall RB; Smith WA; Coats MD, 2014, 'Bearing diagnostics under widely varying speed conditions', in Leclere Q (ed.), CMMNO-2014 Conference Proceedings, CMMNO-2014, Lyon, France, presented at CMMNO-2014, Lyon, France, 15 December 2014 - 16 December 2014
    Conference Papers | 2014
    Randall RB; Smith WA; Coats MD, 2014, 'Bearing diagnostics under widely varying speed conditions', Lyon, France, presented at 4th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, Lyon, France, 15 December 2014 - 16 December 2014
    Conference Papers | 2014
    Ruber K; Kanapathipillai S; Randall R, 2014, 'Investigations of eddy current vibration damping', in Davy, Don, McMinn, Dowsett, Broner and Burgess JCTLNAM (ed.), Proceedings of 43rd International Congress on Noise Control Engineering, 2014 The Australian Acoustical Society, PO Box 1843, Toowong DC QLD 4066, AUSTRALIA, Melbourne, Victoria, Australia, pp. 1 - 14, presented at 43rd International Congress on Noise Control Engineering, Melbourne, Victoria, Australia, 16 November 2014 - 19 November 2014
    Conference Papers | 2014
    Smith WA; Hu C; Randall RB; Peng Z, 2014, 'Vibration-based spall size tracking in rolling element bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, Milan, Italy, presented at Proceedings of IFToMM ICORD 2014 conference, Milan, Italy, 22 September 2014 - 25 September 2014,
    Conference Papers | 2014
    Smith WA; Hu C; Randall RB; Peng Z, 2014, 'Vibration-based spall size tracking in rolling element bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, presented at 9th IFToMM International Conference on Rotor Dynamics, 22 September 2014 - 25 September 2014,
    Conference Papers | 2014
    Smith WA; Randall RB, 2014, 'Regeneration of frequency response functions from poles and zeros: a discussion with implications for cepstrum-based operational modal analysis', in Inter.noise 2014: 43rd International Congress on Noise Control Engineering November 16-19, 2014, presented at Internoise, 16 November 2014 - 19 November 2014,
    Conference Papers | 2013
    Chen J; Randall RB, 2013, 'Simulating bearing knock in an IC engine', in Crocker M (ed.), 20th International Congress on Sound and Vibration 2013 (ICSV20), Bangkok, Thailand, presented at 20th International Conference on Sound and Vibration, ICSV20, Bangkok, Thailand, 07 July 2013 - 11 July 2013
    Conference Papers | 2013
    Chen J; Randall RB, 2013, 'Use of block pseudo angular acceleration for engine misfire diagnosis', in Proceedings of Acoustics 2013 – Victor Harbor, Victor Harbour, SA, presented at Acoustics 2013, Victor Harbour, SA, 17 November 2013 - 20 November 2013
    Conference Papers | 2013
    Dackermann U; Smith WA; Randall RB, 2013, 'Application of cepstrum analysis and artificial neural networks for the damage identification of a two-storey framed structure based on response-only measurements', in Xu YL; Zhu S; Xia Y; Ni YQ; Law SS; Yin JH; Su ZQ (eds.), Structural Health Monitoring for Infrastructure Sustainability, Hong Kong, China, presented at The 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Hong Kong, China, 09 December 2013 - 11 December 2013
    Conference Papers | 2013
    Randall RB; Antoni J; Manzato S; Peeters B; Smith W, 2013, 'New Applications of the Cepstrum in OMA', in Cunha A; Ramos L (ed.), Proceedings 5th International Operational Modal Analysis Conference (IOMAC), Guimaraes, Portugal, presented at IOMAC 2013, Guimaraes, Portugal, 13 May 2013 - 15 May 2013
    Conference Papers | 2013
    Randall RB; Sawalhi N, 2013, 'Cepstral Removal of Periodic Spectral Components from Time Signals', in Dalpiaz G; Rubini R (ed.), Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMN0 2013, Springer, Ferrara, Italy, presented at 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMN02013, Ferrara, Italy, 08 May 2013 - 10 May 2013
    Conference Papers | 2013
    Randall RB; Sawalhi N, 2013, 'Gear Parameter identification in Wind Turbines using diagnostic analysis of gearbox vibration signals', in Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013, Ferrara, Italy, presented at CMMNO 2013, Ferrara, Italy, 08 May 2013 - 10 May 2013
    Conference Papers | 2013
    Randall RB, 2013, 'A History of Cepstrum Analysis and its Application to Mechanical Problems', in Capdessus C; Antoni J (ed.), Proceedings Surveillance 7, Chartres, France, presented at Surveillance 7 - International Conference, Chartres, France, 29 October 2013 - 30 October 2013
    Conference Papers | 2013
    Randall RB, 2013, 'New Developments in the Application of Fault Simulation in Machine Diagnostics', in Dron J-P (ed.), New Developments in the Application of Fault Simulation in Machine Diagnostics, 3rd International Congress on the Engineering of Industrial Risks (CIRI 2013), Reims, France, presented at 3rd International Congress on the Engineering of Industrial Risks (CIRI 2013), Reims, France, 03 July 2013 - 05 July 2013
    Conference Presentations | 2013
    Randall RB, 2013, 'Using Fault Simulations in an IC Engine to Train Neural Networks', presented at 2013 LMS Australia User Conference, Melbourne, 04 September 2013 - 04 September 2013
    Conference Papers | 2013
    Ratz J; Forbes G; Randall R, 2013, 'Gas turbine blade natural frequency measurement using external casing vibrations', in Proceedings for the Joint Conference: MFPT 2013 and ISA's 59th International Instrumentation Symposium, ISA 2013: Sensors and Systems for Reliability, Safety and Affordability
    Conference Papers | 2013
    Ratz J; Forbes G; Randall R, 2013, 'Gas turbine blade natural frequency measurement using external casing vibrations', in Proceedings of the International Instrumentation Symposium, pp. 132 - 140
    Conference Papers | 2012
    Chen J; Randall R; Peeters B; Van Der Auweraer H; Desmet W, 2012, 'Automated diagnosis of piston slap in engines', in 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, pp. 1145 - 1155
    Conference Papers | 2012
    Chen J; Randall R; Peeters B; Van Der Auweraer H, 2012, 'Automated diagnosis of piston slap faults in internal combustion engines: Based on a simulation model', in Australian Acoustical Society Conference 2012, Acoustics 2012: Acoustics, Development, and the Environment, pp. 469 - 475
    Conference Papers | 2012
    Chen J; Randall RB; Peeters B; Desmet W; Van Der Auweraer HD, 2012, 'Neural network based diagnosis of mechanical faults in IC engines', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 679 - 690, presented at 10th International Conference on Vibrations in Rotating Machinery, London, UK, 11 September 2012 - 13 September 2012
    Conference Papers | 2012
    Chen J; Randall RB; Peeters B; Van Der Auweraer HD; Desmet W, 2012, 'Inertial property estimation by the modal model method', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 2071 - 2080, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012
    Conference Papers | 2012
    Chen J; Randall RB; Peeters B; Van Der Auweraer HD, 2012, 'Automated diagnosis of piston slap faults in internal combustion engines: based on a simulation model', in Acoustics 2012 Fremantle: Acoustics, Development and the Environment, The Australian Acoustical Society, Western Australian Division, Perth, WA, pp. 1 - 7, presented at Acoustics 2012, Fremantle, 21 November 2012 - 23 November 2012
    Conference Papers | 2012
    Coats M; Randall RB, 2012, 'Compensating for speed variation by order tracking with and without a tacho signal', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 727 - 738, presented at 10th International Conference on Vibrations in Rotating Machinery, London, UK, 11 September 2012 - 13 September 2012
    Conference Papers | 2012
    Coats M; Randall RB, 2012, 'Order-Tracking with and without a tacho signal for gear fault diagnostics', in Acoustics 2012 Fremantle: Acoustics, Development and the Environment, The Australian Acoustical Society, Western Australian Division, Perth, WA, pp. 1 - 8, presented at Acoustics 2012, Fremantle, 21 November 2012 - 23 November 2012
    Conference Papers | 2012
    Deshpande L; Randall RB; Sawalhi N, 2012, 'Improved simulation of bearing faults using a finite element model reduction technique', in The 9th Intnl Conf on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Co (for BINDT), UK, pp. 1 - 11, presented at The 9th Intnl Conf on Condition Monitoring and Machinery Failure Prevention Technologies, London, UK, 12 June 2012 - 14 June 2012
    Conference Papers | 2012
    Deshpande L; Sawalhi N; Randall RB, 2012, 'Bearing fault simulation using finite element model updating and reduction techniques', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 148 - 154, presented at 7th Australasian Congress of Applied Mechanics, Adelaide, 09 December 2012 - 12 December 2012
    Conference Papers | 2012
    Peeters B; Randall RB; Manzato S; Marra F; Coppotelli G, 2012, 'Helicopter in-flight modal analysis: solutions for dealing with harmonics and noise', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 2045 - 2046, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012
    Conference Papers | 2012
    Randall B; Grzebieta R, 2012, 'The Origin of ACAM by Bob Randall and Raphael Grzebieta', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 9 - 11
    Conference Papers | 2012
    Randall RB; Peeters B; Antoni J; Manzato S, 2012, 'New cepstral methods of signal pre-processing for operational modal analysis', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 755 - 764, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012
    Conference Papers | 2012
    Randall RB; Sawalhi N; Coats M, 2012, 'Separation of Gear and Bearing Fault Signals from a Wind Turbine Transmission under Varying Speed and Load', in Fakhfakh T; Bartelmus W; Chaari F; Zimroz R; Haddar M (eds.), Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2012, Springer, Berlin Heidelberg, pp. 3 - 12, presented at Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO'2012), Hammamet Tunisia, 26 March 2012 - 28 March 2012,
    Conference Papers | 2012
    Randall RB, 2012, 'Updated cepstral methods for operational modal analysis', Jacksonville, FL, pp. 201 - 209, presented at 30th IMAC, A Conference on Structural Dynamics, 2012, Jacksonville, FL, 30 January 2012 - 02 February 2012,
    Conference Papers | 2011
    Chen J; Randall RB, 2011, 'A vibration signal based simulation model for the misfire of internal combustion engines.', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 659 - 671, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011
    Conference Papers | 2011
    Deshpande L; Sawalhi N; Randall RB, 2011, 'Dynamic simulation of a gearbox system in the presence of bearing faults using finite element model reduction techniques', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 878 - 889, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011,
    Conference Papers | 2011
    Deshpande L; Sawalhi N; Randall RB, 2011, 'Fault simulation in a gearbox using finite element model reduction techniques', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Springer, USA, pp. 399 - 410, presented at 29th IMAC, a Conference on Structural Dynamics, Jacksonville, FL, USA, 31 January 2011 - 03 February 2011
    Conference Papers | 2011
    Deshpande L; Sawalhi N; Randall RB, 2011, 'Gearbox Fault Simulation using a Finite Element Model Reduction Technique', in Proceedings of Acoustics 2011, The Australian Acoustical Society, Darlinghurst NSW, pp. 1 - 7, presented at Acoustics 2011, Gold Coast, Australia, 02 November 2011 - 04 November 2011
    Conference Papers | 2011
    Randall RB; Sawalhi N; Marscher W; Thomas W; Weiss J, 2011, 'Decomposition of structural vibration for wind turbine diagnosis', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, MFPT 2011, Virginia Beach, VA, 10 May 2011 - 12 May 2011
    Conference Papers | 2011
    Randall RB; Sawalhi N, 2011, 'Editing time signals using the real cepstrum', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, MFPT 2011, Virginia Beach, VA, 10 May 2011 - 12 May 2011
    Conference Papers | 2011
    Randall RB; Sawalhi N, 2011, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', in IUTAM Bookseries, pp. 429 - 440,
    Conference Papers | 2011
    Randall RB; Sawalhi N, 2011, 'Use of the cepstrum to remove selected discrete frequency components from a time signal', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Vol. 5, Springer, New York, USA, pp. 451 - 461, presented at 29th IMAC, a Conference on Structural Dynamics, Jacksonville, FL, USA, 31 January 2011 - 03 February 2011,
    Conference Papers | 2011
    Ruber K; Kanapathipillai S; Feng N; Randall R, 2011, 'Investigations of a tuned vibration absorber with high damping for increasing acoustic panels sound transmission loss in low frequency range', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 158 - 164
    Conference Papers | 2011
    Sawalhi N; Deshpande L; Randall RB, 2011, 'Improved simulations of faults in gearboxes for diagnostic and prognostic purposes using a reduced finite element model of the casing', in Fourteenth Australian Aeronautical Conference, Royal Aeronautical Society (Australian Divison) / Engineers Australia, Australia, pp. 1 - 14, presented at Seventh DSTO International Conference on Health and Usage Monitoring, Melbourne, Australia, 28 February 2011 - 03 March 2011
    Conference Papers | 2011
    Sawalhi N; Randall RB, 2011, 'Cepstrum Editing (Liftering) to Remove Discrete Frequency Signals leaving a Signal Dominated by Structural Response Effects- and Enhance Fault Detection In Rolling Element Bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 132 - 143, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011
    Conference Papers | 2011
    Sawalhi N; Randall RB, 2011, 'Signal Pre-whitening using Cepstrum Editing (Liftering) to enhance Fault Detection in Rolling Element Bearings', in COMADEM 2011, COMADEM International, UK, pp. 1 - 7, presented at Comadem 2011, Stavanger, Norway, 31 May 2011 - 01 June 2011
    Conference Papers | 2011
    Sawalhi N; Randall RB, 2011, 'Signal pre-whitening for fault detection enhancement and surveillance in rolling element bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 549 - 561, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011
    Conference Papers | 2010
    Deshpande L; Sawalhi N; Randall RB, 2010, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 10, presented at ACAM 2010, Perth, 12 December 2010 - 15 December 2010
    Conference Papers | 2010
    Forbes GL; Alshroof O; Randall RB, 2010, 'Gas turbine blade vibration and casing wall pressure interaction', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 9, presented at ACAM 2010, Perth, 12 December 2010 - 15 December 2010
    Conference Papers | 2010
    Randall RB, 2010, 'Signal decomposition for symptom enhancement: A journey from Fourier analysis through time/frequency analysis to blind source separation', in Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010, pp. 15 - 34
    Conference Papers | 2010
    Sawalhi N; Randall RB, 2010, 'Improved simulations for fault size estimation in rolling element bearings', in The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Company, England, pp. 1 - 12, presented at The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Stratford-upon-Avon, England, 22 June 2010 - 24 June 2010
    Conference Papers | 2010
    Sawalhi N; Randall RB, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', in Proceedings of 20th International Congress on Acoustics ICA 2010, Australian Acoustical Society, Sydney, pp. 1 - 7, presented at International Congress on Acoustics, Sydney, 23 August 2010 - 27 August 2010
    Conference Papers | 2010
    Urbanek J; Barszcz T; Sawalhi N; Randall RB, 2010, 'Comparison of amplitude based and phase based methods for speed tracking in application to wind turbines', Krakow, presented at 11th Workshop on Smart Diagnostics of Structures, Krakow, 18 October 2010 - 20 October 2010
    Conference Papers | 2009
    Chia W; Randall RB; Antoni J, 2009, 'System Identification with Mean Differential Cepstrum using Random Decrement', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009
    Conference Papers | 2009
    Coats M; Sawalhi N; Randall RB, 2009, 'Extraction of Tacho Information from a Vibration Signal for Improved Synchronous Averaging', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009,
    Conference Papers | 2009
    Desbazeille M; Randall RB; Guillet F; El Badaoui M; Hoisnard C, 2009, 'Fault detection and localization of a large diesel engine by analyzing the instantaneous crankshaft angular speed', in 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009, Dublin, pp. 1240 - 1251, presented at 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, 23 June 2009 - 25 June 2009
    Conference Papers | 2009
    Forbes GL; Randall RB, 2009, 'Gas Turbine Casing Response to Blade Vibrations: Analytical and Experimental results', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at 6th DSTO International Conference on Health & Usage Monitoring (HUMS 09), Melbourne, Victoria, 09 March 2009 - 12 March 2009
    Conference Papers | 2009
    Forbes GL; Randall RB, 2009, 'Simulation of Gas Turbine blade vibration measurement from unsteady casing wall pressure', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009
    Conference Papers | 2009
    Randall RB; Sawalhi N, 2009, 'Signal processing techniques for bearing fault size determination', in 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Fundaci n TEKNIKER, San Sebastian, Spain, presented at 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, San Sebastian, Spain, 09 June 2009 - 11 June 2009
    Conference Papers | 2009
    Randall RB; Sawalhi N, 2009, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', DELHI, presented at IUTAM-symposium on emerging Trends in Rotor Dynamics, DELHI, 23 March 2009 - 26 March 2009
    Conference Papers | 2009
    Randall RB, 2009, 'The application of fault simulation to machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at Recent developments in acoustics, noise and vibration, Krakow, Poland, 05 July 2009 - 09 July 2009
    Conference Papers | 2009
    Randall RB, 2009, 'The present state and future developments in machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at Recent developments in acoustics, noise and vibration, Krakow, Poland, 05 July 2009 - 09 July 2009
    Conference Papers | 2009
    Randall RB, 2009, 'The use of simulation models to generate data corresponding to faults in machines.', in The Proceedings of 2009 8th International Conference on Reliability, Maintainability and Safety, Chengdu, China, Chengdu, China, 20 July 2009 - 24 July 2009,
    Conference Papers | 2009
    Sawalhi N; Randall RB, 2009, 'Effects of limiting the bandwidth of the vibration signal on bearing fault detection and diagnosis using state of the art techniques', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at 6th DSTO International Conference on Health & Usage Monitoring (HUMS 09), Melbourne, Victoria, 09 March 2009 - 12 March 2009
    Conference Papers | 2009
    Sawalhi N; Randall RB, 2009, 'Tracking of spall size in rolling element bearings', Dublin, presented at 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, 23 June 2009 - 25 June 2009
    Conference Papers | 2008
    Ait sghir K; Randall RB; El Badaoui M; Guillet F; Bakrim M; Aboutajdine D, 2008, 'Diagnosis of milling cutting tools from the excitation identified using cepstral analysis and second order cyclic statistics', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, Leuven, Belgium, pp. 751 - 764, presented at Noise and Vibration Engineering 2008, Leuven, Belgium, 15 September 2008 - 17 September 2008,
    Conference Papers | 2008
    Forbes GL; Randall RB, 2008, 'Detection of a Blade Fault from Simulated Gas Turbine Casing Response Measurements', in PROCEEDINGS OF THE FOURTH EUROPEAN WORKSHOP ON STRUCTURAL HEALTHMONITORING 2008, Kracow, Poland, pp. 882 - 889, presented at Structural Health Monitoring 2008, Kracow, Poland, 02 July 2008 - 04 July 2008
    Conference Papers | 2008
    Forbes GL; Randall RB, 2008, 'Separation of excitation forces from simulated gas turbine casing response measurements', in 7th European Conference on Structural Dynamics - EURODYN 2008, Southampton, United Kingdom, presented at Structural Dynamics, Southampton, United Kingdom, 07 July 2008 - 09 July 2008
    Conference Papers | 2008
    Ibrahim A; Guillet F; El Badaoui M; Randall RB; Remond D, 2008, 'Detection of rolling element bearing faults by analysis of the motor current', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 573 - 582, presented at Vibrations in Rotating Machinery 2008, Exeter, United Kingdom, 08 September 2008 - 10 September 2008
    Conference Papers | 2008
    Randall RB, 2008, 'New cepstral methods of operational modal analysis', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, pp. 2535 - 2548, presented at Noise and Vibration Engineering 2008, Leuven, Belgium, 15 September 2008 - 17 September 2008
    Conference Papers | 2008
    Sawalhi N; Randall RB, 2008, 'A combined lumped mass parameter and finite element model of a single stage gearbod for bearing fault simulation', in Svoboda V (ed.), 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Condition Monitoring and Diagnostic Engineering Management, Prague, Czech Republic, pp. 1 - 6, presented at Condition Monitoring and Diagnostic Engineering Management, Prague, Czech Republic, 11 June 2008 - 13 June 2008
    Conference Papers | 2008
    Sawalhi N; Randall RB, 2008, 'Improved simulation of faults in rolling element bearings in gear boxes', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 539 - 548, presented at Vibrations in Rotating Machinery 2008, Exeter, United Kingdom, 08 September 2008 - 10 September 2008
    Conference Papers | 2008
    Sawalhi N; Randall RB, 2008, 'Localised fault diagnosis in rolling element bearings in gearboxes', in The Fifth International Conference on Condition Monitoring & Machinery Failure Prevention Technologies, Condition Monitoring & Machinery Failure Prevention Technologies, Edinburgh, United Kingdom, presented at Condition Monitoring & Machinery Failure Prevention Technologies, Edinburgh, United Kingdom, 15 July 2008 - 18 July 2008
    Conference Papers | 2008
    Sawalhi N; Randall RB, 2008, 'Novel signal processing techniques to aid bearing prognostics', in IEEE (ed.), First International Conference on Prognostics and Health Management, Prognostics and health management, Denver, Colorado, USA, pp. 1 - 8, presented at Prognostics and health management, Denver, Colorado, USA, 06 October 2008 - 09 October 2008
    Conference Papers | 2008
    Shen A; Randall RB, 2008, 'Optimal rib stiffening for noise reduction of constant speed gearboxes', in Ahn T; Jeon JY; Han J-H; Hong S-Y; Kim K-J; Song O (eds.), 15th International Congress on Sound and Vibration, Daejeon, Korea, pp. 2339 - 2346, presented at Congress on Sound and Vibration, Daejeon, Korea, 06 July 2008 - 10 July 2008
    Conference Papers | 2008
    Vass J; Randall RB; Kara S; Kaebernick H, 2008, 'Vibration-based approach to lifetime prediction of washing machines.', in Applying life cycle knowledge to engineering solutions, Applying life cycle knowledge to engineering solutions, University of New South Wales, presented at Applying life cycle knowledge to engineering solutions, University of New South Wales, 17 March 2008 - 19 March 2008
    Conference Papers | 2007
    Akil M; Serviere C; Randall RB, 2007, 'Contrast function based fourth-order statistics and Wiener filtering for separation of convolutive mixtures.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, 09 July 2007 - 12 July 2007
    Conference Papers | 2007
    Antoni J; Hanson D; Randall B, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis', in Key Engineering Materials, pp. 473 - 478,
    Conference Papers | 2007
    Chia WL; Randall RB; Antoni J, 2007, 'Propagative identification of SIMO systems using the mean differential cepstrum (MDC).', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
    Conference Papers | 2007
    Forbes GL; Randall RB, 2007, 'Simulated gas turbine casing response to rotor blade pressure excitation.', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
    Conference Papers | 2007
    Hanson D; Winton M; Emslie R; Brown G; Randall RB, 2007, 'Development of an in-service dynamic model of a double deck passenger train.', in ICSV14 2007: 14th International Congress on Sound and Vibration, ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, 09 July 2007 - 12 July 2007
    Conference Papers | 2007
    Sawalhi N; Randall RB, 2007, 'Semi-automated bearing diagnostics - three case studies.', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, 13 June 2007 - 15 June 2007
    Conference Papers | 2007
    Sawalhi N; Randall RB, 2007, 'Simulation of vibrations produced by localized faults in rolling elements of bearings in gearboxes.', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
    Conference Papers | 2007
    Sekko E; Randall RB; Capdessus C, 2007, 'Gear tooth crack detection by a state space model approach', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, 13 June 2007 - 15 June 2007
    Conference Papers | 2007
    Shen A; Randall RB, 2007, 'Minimisation of noise and vibration level from a steel panel.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, 09 July 2007 - 12 July 2007
    Conference Papers | 2007
    Vass J; Randall RB; Cristalli C; Torcianti B; Sovka P; Smid R, 2007, 'Spectrum enhancement of laser vibrometer signals using a new speckle noise reduction technique and angular resampling.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, 09 July 2007 - 12 July 2007
    Conference Papers | 2007
    Zhang Y; Randall RB, 2007, 'Rolling element bearing fault diagnosis based on genetic algorithms', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, 09 July 2007 - 12 July 2007
    Conference Papers | 2007
    Zhang Y; Randall RB, 2007, 'The in-cylinder pressure reconstruction and indicated torque estimation based on instantaneous engine speed and one measured in-cylinder pressure.', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, 13 June 2007 - 15 June 2007
    Conference Papers | 2006
    Chia WL; Randall RB; Antoni J, 2006, 'Blind system identification using matrix mean differential cepstru with QR-Cholesky decomposition', in 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, presented at 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, 29 March 2006 - 31 March 2006
    Conference Papers | 2006
    Chia WL; Randall RB; Antoni J, 2006, 'Multiple-input-multiple-output blind system identification on simulated 5 DOF system using the mean differential cepstrum', in Brennan MJ; Liguore S; Mace BR; Muggleton JM; Murphy KD; Petersson BAT; Rizzi SA; Shen R (eds.), Recent Advances in Structural Dynamics, Recent Advances in Structural Dynamics, Southampton England, pp. 1 - 12, presented at Recent Advances in Structural Dynamics, Southampton England, 17 July 2006 - 19 July 2006
    Conference Papers | 2006
    Hanson DJ; Randall RB; Antoni J; Bartlett S; Ford RA; Thompson DJ; Waters T, 2006, 'Operational modal analysis of a diesel electric locomotive using cyclostationarity', in Brennan MJ; Liguore S; Mace BR; Muggleton JM; Murphy KD; Petersson BAT; Rizzi SA; Shen A (eds.), Recent Advances in Structural Dynamics, Recent Advances in Structural Dynamics, Southampton England, pp. 1 - 12, presented at Recent Advances in Structural Dynamics, Southampton England, 17 July 2006 - 19 July 2006
    Conference Papers | 2006
    Hanson DJ; Randall RB; Antoni J; Ford RA; Thompson DJ; Waters T, 2006, 'Operational modal analysis using cyclostationarity and the complex cepstrum', in 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, presented at 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, 29 March 2006 - 31 March 2006
    Conference Papers | 2006
    Randall RB; Holley L, 2006, 'Blind source separation and system identification for convolutive mixtures with well separated modes.', in Sas P; De Munck M (ed.), Noise and Vibration Engineering 2006, Leuven, Belgiuim, pp. 3993 - 4001, presented at Noise and Vibration Engineering 2006, Leuven, Belgiuim, 18 September 2006 - 20 September 2006
    Conference Papers | 2006
    Sawalhi N; Randall RB; Endo H, 2006, 'Gear and bearing fault simulation applied to diagnostics and prognostics', in Role of condition monitoring and diagnostics in health management systems for manufacturing, transport, infrastructure and process industries, Role of condition monitoring and diagnostics in health management systems for manufacturing, transport, infrastructure and process industries, Lulea, Sweden, presented at Role of condition monitoring and diagnostics in health management systems for manufacturing, transport, infrastructure and process industries, Lulea, Sweden, 12 June 2006 - 15 June 2006
    Conference Papers | 2006
    Sawalhi N; Randall RB; Endo H, 2006, 'Simulating gear and bearing interactions in the presence of faults', in Rotor Dynamics, Rotor Dynamics, Vienna, Austria, presented at Rotor Dynamics, Vienna, Austria, 25 September 2006 - 28 September 2006
    Conference Papers | 2006
    Sawalhi N; Randall RB, 2006, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', in Engineering Asset Management, Gold Coast, Qld, presented at Engineering Asset Management, Gold Coast, Qld, 11 July 2006 - 15 July 2006
    Conference Papers | 2006
    Sawalhi N; Randall RB, 2006, 'Simulation of the vibrations produced by extended bearing faults in gearboxes', in Acoustics 2006: Noise of Progress, Christchruch, New Zealand, presented at Acoustics 2006 Noise of Progress, Christchruch, New Zealand, 20 November 2006 - 22 November 2006
    Conference Papers | 2005
    Chia WL; Randall RB; Antoni J; Raad A, 2005, 'Blind system identification in a multiple-input-multiple-output (MIMO) system using the mean differential cepstrum (MDC).', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Papers | 2005
    Chia WL; Randall RB; Antoni J, 2005, 'An operational analysis technique for the MIMO situation based on cepstral techniques', in Brincker R; Moller N (ed.), 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, pp. 561 - 568, presented at 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, 26 April 2005 - 27 April 2005
    Conference Papers | 2005
    Hanson DJ; Randall RB; Raad A, 2005, 'Operational modal analysis of a mechanical structure with cyclostationary inputs.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Papers | 2005
    Hanson DJ; Waters T; Thompson DJ; Randall RB, 2005, 'Do anti-resonance frequencies benefit finite element model updating?', in Brincker R; Moller N (ed.), 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, pp. 369 - 376, presented at 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, 26 April 2005 - 27 April 2005
    Conference Papers | 2005
    Liu X; Randall RB; Antoni J, 2005, 'Blind source separation of internal combustion engine vibration signals.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Papers | 2005
    Randall RB, 2005, 'Applications of spectral kurtosis in machine diagnostics and prognostics KEYNOTE PAPER', in Damage assessment of structures, Gdanisk, Poland, pp. 21 - 30, presented at Damage assessment of structures, Gdanisk, Poland, 04 July 2005 - 06 July 2005
    Conference Papers | 2005
    Randall RB, 2005, 'Cepstral methods of modal analysis', in Noise and Vibration Emerging Methods, Noise and Vibration Emerging: Methods, Saint Raphael, France, pp. 1 - 12, presented at Noise and Vibration Emerging: Methods, Saint Raphael, France, 18 April 2005 - 21 April 2005
    Conference Papers | 2005
    Sawalhi N; Randall RB, 2005, 'Spectral kurtosis enhancement using autoregressive models.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Papers | 2005
    Shen A; Randall RB; Maury C, 2005, 'Minimising of the noise radiation of constant speed gearboxes.', in International Congress on Sound and Vibration 2005, Lisbon, Portugal, presented at International Congress on Sound and Vibration 2005, Lisbon, Portugal, 11 July 2005 - 14 July 2005
    Conference Papers | 2005
    Shen A; Randall RB, 2005, 'Adaptive design and adjustment of low noise gearboxes.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
    Conference Papers | 2004
    Bonnardot F; Antoni J; Randall RB; El Badaoui M, 2004, 'Enhancement of second-order cyclostationary signals: application to vibration analysis', in IEEE International Conference on Acoustics, Speech, and Signal Processing; ICASSP, IEEE International Conference on Acoustics, Montreal, Canada, presented at IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP 2004), Montreal, Canada, 17 May 2004 - 21 May 2004
    Conference Papers | 2004
    Endo H; Randall RB; Gosselin C, 2004, 'Differential diagnosis of spall vs. cracks in the gear tooth fillet region.', in Pusey HC; Pusey SC; Hobbs WR (eds.), MFPT Technologies to Meet Corporate Goals, MFPT Technologies to Meet Corporate Goals, Virginia, USA, pp. 143 - 152, presented at MFPT Technologies to Meet Corporate Goals, Virginia, USA, 25 April 2004 - 30 April 2004
    Conference Papers | 2004
    Endo H; Randall RB, 2004, 'The effects of localized gear tooth damage in the gear dynamics - a comparison of the effect of a gear tooth root crack and a spall in the gear transmission error.', in Vibrations in Rotating Machinery, Swansea, UK, pp. 333 - 342, presented at Vibrations in Rotating Machinery 2004, Swansea, UK, 07 September 2004 - 09 September 2004
    Conference Papers | 2004
    Randall RB; Antoni J; Sawalhi N, 2004, 'The use of spectral kurtosis in bearing diagnostics', in Ivanov NI; Crocker MJ (ed.), Eleventh international congress on sound and vibration, 11th international congress on sound and vibration, St Petersburg, Russia, pp. 999 - 1006, presented at 11th international congress on sound and vibration, St Petersburg, Russia, 05 July 2004 - 08 July 2004
    Conference Papers | 2004
    Randall RB; Antoni J, 2004, 'Recent advances in bearing diagnostic techniques for helicopter gearboxes.', in Pusey HC; Pusey SC; Hobbs WR (eds.), MFPT Technologies to Meet Corporate Goals, MFPT Technologies to Meet Corporate Goals, Virginia, USA, pp. 1 - 10, presented at MFPT Technologies to Meet Corporate Goals, Virginia, USA, 25 April 2004 - 30 April 2004
    Conference Papers | 2004
    Randall RB, 2004, 'Signal decomposition for symptom enhancement: a journey from Fourier analysis through time/frequency analysis to blind source separation.', in Michalski R (ed.), Technical Diagnostics, Technical Diagnostics, Poznan, Poland, pp. 1 - 54, presented at Technical Diagnostics, Poznan, Poland, 06 September 2004 - 09 September 2004
    Conference Papers | 2004
    Sawalhi N; Randall RB, 2004, 'The application of spectral kurtosis to bearing diagnostics.', in Acoustics 2004: Transportation Noise and Vibration: The New Millenium, Acoustics 2004: Transportation Noise and Vibration: The New Millenium, Gold Coast, Qld, presented at Acoustics 2004: Transportation Noise and Vibration: The New Millenium, Gold Coast, Qld, 03 November 2004 - 05 November 2004
    Conference Papers | 2004
    Shi L; Randall RB; Antoni J, 2004, 'Rolling element bearing fault detection using improved envelope analysis', in Vibrations in Rotating Machinery, Swansea, UK, presented at Vibrations in Rotating Machinery 2004, Swansea, UK, 07 September 2004 - 09 September 2004
    Conference Papers | 2003
    Raad A; Zhang F; Randall RB; Sidahmed M, 2003, 'On the comparison of the use of AE and vibration analysis for early gear fault detection', in Wespac VIII Conference: Acoustics on the move, Wespac VIII Conference: Acoustics on the move, Melbourne, presented at Wespac VIII Conference: Acoustics on the move, Melbourne, 07 April 2003 - 09 April 2003
    Conference Papers | 2003
    Randall RB; Antoni J, 2003, 'A new FFT-based method of separating discrete-frequency and random signals', in Enhancing company`s profitability and competitiveness through more accurate and reliable tools and methods for continuous and cost-effective improvement of maintenance, especially condition-based, Enhancing company`s profitability and competitiveness through more accurate and reliable tools and methods for continuous and cost-effective improvement of maintenance, especially condition-based, Vaxjo, Sweden, presented at Enhancing company`s profitability and competitiveness through more accurate and reliable tools and methods for continuous and cost-effective improvement of maintenance, especially condition-based, Vaxjo, Sweden, 27 August 2003 - 29 August 2003
    Conference Papers | 2003
    Randall RB; Antoni JE, 2003, 'A new discrete-random signal separator', in Wespac VIII Conference: Acoustics on the move, Wespac VIII Conference: Acoustics on the move, Melbourne, presented at Wespac VIII Conference: Acoustics on the move, Melbourne, 07 April 2003 - 09 April 2003
    Conference Papers | 2003
    Randall RB; Zurita Villarroel G; Wardrop TA, 2003, 'A comparative study of curve-fitting algorithms for the extraction of modal parameters from response measurements', in International Congress on Sound and Vibration 2003, Stockholm, Sweden, pp. 4409 - 4416, presented at International Congress on Sound and Vibration 2003, Stockholm, Sweden, 07 July 2003 - 10 July 2003
    Conference Papers | 2002
    Combet F; Jaussaud P; Martin N; Randall RB, 2002, 'Matching signals from experiments at slightly different speeds', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1595 - 1604, presented at Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 16 September 2002 - 18 September 2002
    Conference Papers | 2002
    Feng N; Hahn EJ; Randall RB, 2002, 'Using transient analysis software to simulate vibration signals due to rolling element bearing defects', in Applied Mechanics - Progress and Applications, Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at Applied Mechanics - Progress and Applications, University of Sydney, NSW, 20 February 2002 - 22 February 2002
    Conference Papers | 2002
    Ford RA; Randall RB; Wardrop TA, 2002, 'Updating modal properties from response-only measurements on a rail vehicle.', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1299 - 1306, presented at Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 16 September 2002 - 18 September 2002
    Conference Papers | 2002
    Raad A; Antoni J; Randall B; Sidahmed M, 2002, 'Gear vibration modeling and fault characterization', in Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA, pp. 1487 - 1495
    Conference Papers | 2002
    Randall RB; Antoni JE, 2002, 'Diagnosis of localised and extended rolling element bearing faults in the presence of strong gear signals.', in 6th International Conference on Rotor Dynamics, 6th International Conference on Rotor Dynamics, University of New South Wales, presented at 6th International Conference on Rotor Dynamics, University of New South Wales, 30 September 2002 - 04 October 2002
    Conference Papers | 2002
    Randall RB; Antoni JE, 2002, 'Differential diagnostics of gear and bearing faults using spectral correlation.', in Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at Applied Mechanics - Progress and Applications, University of Sydney, NSW, 20 February 2002 - 22 February 2002
    Conference Papers | 2002
    Randall RB; Liew A; Ford RA; Wiwatowski K, 2002, 'Determination by rail carriage suspension characteristics by response measurements', in Applied Mechanics - Progress and Applications, Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at Applied Mechanics - Progress and Applications, University of Sydney, NSW, 20 February 2002 - 22 February 2002
    Conference Papers | 2002
    Randall RB, 2002, 'Detection and diagnosis of incipient bearing failure in helicopter gearboxes', in International conference and Exhibition on Failure Analysis, International conference and Exhibition on Failure Analysis, Melbourne, presented at International conference and Exhibition on Failure Analysis, Melbourne, 20 November 2002 - 22 November 2002
    Conference Papers | 2002
    Randall RB, 2002, 'State of the art in monitoring rotating machinery', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1457 - 1477, presented at Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, 16 September 2002 - 18 September 2002
    Conference Papers | 2001
    Feng N; Hahn EJ; Randall RB, 2001, 'Simulation of vibration signals from a rolling element bearing defect.', in Forsyth GF (ed.), DSTO International Conference on Health and Usage Monitoring, DSTO International Conference on Health and Usage Monitoring, Melbourne, pp. 37 - 52, presented at DSTO International Conference on Health and Usage Monitoring, Melbourne, 19 February 2001 - 20 February 2001
    Conference Papers | 2001
    Randall RB; Antoni JE, 2001, 'Optimisation of SANC for separating gear and bearing signals.', in Comadem 2001, Manchester University, UK, presented at Comadem 2001, Manchester University, UK, 04 September 2001 - 06 September 2001
    Conference Papers | 2001
    Randall RB; Antoni JE, 2001, 'Separation of gear and bearing fault signals in helicopted gearboxes.', in 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, University of Technology of Compiegne, France, pp. 161 - 172, presented at 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, University of Technology of Compiegne, France, 16 October 2001 - 18 October 2001
    Conference Papers | 2001
    Randall RB, 2001, 'Bearing diagnostics in helicopter gearboxes.', in Comadem 2001, Manchester University, UK, presented at Comadem 2001, Manchester University, UK, 04 September 2001 - 06 September 2001
    Conference Papers | 2000
    Randall RB; Antoni JE; Chobsaard S, 2000, 'A comparison of cyclostationary and envelope analysis in the diagnostics of rolling element bearings', in IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP2000), Istanbul, Turkey, presented at IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP 2000), Istanbul, Turkey, 05 June 2000 - 09 June 2000
    Conference Papers | 2000
    Randall RB; Gao Y, 2000, 'A simulation model for training neural networks to recognise bearing faults', in Sas P; Moens D (ed.), 25th International conference on modal analysis noise and vibration engineering, 25th International conference on modal analysis noise and vibration engineering, Katholieke Universiteit Leuven, Belgium, pp. CD Rom - CD Rom, presented at 25th International conference on modal analysis noise and vibration engineering, Katholieke Universiteit Leuven, Belgium, 13 September 2000 - 15 September 2000
    Conference Papers | 2000
    Randall RB; Gao Y, 2000, 'A simulation model for training neural networks to recognise bearing faults', in Sas P; Moens D (ed.), NOISE AND VIBRATION ENGINEERING, VOLS 1 - 3, PROCEEDINGS, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, BELGIUM, LEUVEN, pp. 225 - 232, presented at 1st International ISMA Workshop on Noise and Vibration in Agricultural and Biological Engineering, BELGIUM, LEUVEN, 13 September 2000 - 14 September 2000,
    Conference Papers | 2000
    Randall RB, 2000, 'Research into machine diagnostics at the DSTO centre of expertise in vibration analysis', in 2nd International congress of technical diagnostics, 2nd International congress of technical diagnostics, Warsaw, Poland, pp. CD Rom - CD Rom, presented at 2nd International congress of technical diagnostics, Warsaw, Poland, 19 September 2000 - 22 September 2000
    Conference Papers | 1998
    Du S; Randall RB, 1998, 'Prediction and measurement of dynamic gear transmission error', in 5th International Conference on Rotor Dynamics, 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, presented at 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, 07 September 1998 - 10 September 1998
    Conference Papers | 1998
    Gao Y; Randall RB; Ford RA, 1998, 'Diagnosis of railway bearing faults from track response vibrations', in COMADEM 1998, COMADEM `98, Launceston, presented at COMADEM `98, Launceston, 08 December 1998 - 11 December 1998
    Conference Papers | 1998
    Gao Y; Randall RB, 1998, 'Detection of helicopter pinion bearing faults by vibration analysis', in Djojodihardjo H; Laschka B; Wood LA; Singh R (eds.), 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, pp. 675 - 682, presented at 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, 31 August 1998 - 03 September 1998
    Conference Papers | 1998
    Gao Y; Randall RB, 1998, 'Using CPB spectrum differences to train neural network to recognise faults in helicopter gearbox bearings', in COMADEM 1998, COMADEM `98, Launceston, presented at COMADEM `98, Launceston, 08 December 1998 - 11 December 1998
    Conference Papers | 1998
    Ho D; Randall RB, 1998, 'Improving the efficiency of SANC in its application to bearing diagnostics', in COMADEM 1998, COMADEM `98, Launceston, presented at COMADEM `98, Launceston, 08 December 1998 - 11 December 1998
    Conference Papers | 1998
    Ho D; Randall RB, 1998, 'Manifestations of bearing fault vibrations in helicopter gearboxes', in 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, pp. None - None, presented at 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, 16 July 1998 - 17 July 1998
    Conference Papers | 1998
    Randall RB; Bye AM; Gao Y, 1998, 'Bearing diagnostics by digital analysis techniques in high background noise situations', in Sas P (ed.), International Conference on Noise and Vibration Engineering 1998, International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, pp. 1379 - 1386, presented at International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, 16 September 1998 - 18 September 1998
    Conference Papers | 1998
    Randall RB; Gao Y; Swevers J, 1998, 'Updating modal models from response measurements', in 12th Australasian Compumod Users` Conference, Hunter Valley, NSW, Australia, presented at 12th Australasian Compumod Meeting, Hunter Valley, NSW, Australia, 15 October 1998 - 16 October 1998
    Conference Papers | 1998
    Randall RB; Gao Y, 1998, 'Detecting helicopter gearbox bearing faults using CPB spectra', in 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, pp. None - None, presented at 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, 16 July 1998 - 17 July 1998
    Conference Papers | 1998
    Randall RB; Ho D; Gao Y, 1998, 'Bearing diagnostics in helicopter gearboxes', in Djojodihardjo H; Laschka B; Wood LA; Singh R (eds.), 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, pp. 157 - 163, presented at 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, 31 August 1998 - 03 September 1998
    Conference Papers | 1998
    Randall RB, 1998, 'Some developments in machine condition monitoring', in 5th International Conference on Rotor Dynamics, 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, presented at 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, 07 September 1998 - 10 September 1998
    Conference Papers | 1998
    Zurita G; Agren A; Randall RB; Gao Y, 1998, 'Reconstruction of cylinder pressure time trace on a six-cylinder engine from acceleration measurements', in Sas P (ed.), International Conference on Noise and Vibration Engineering 1998, International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, pp. 1387 - 1393, presented at International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, 16 September 1998 - 18 September 1998
    Conference Papers | 1997
    Guo YC; Ford RA; Randall RB, 1997, 'Mechanical signature enhancement of response vibrations in the time lag domain', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at 5th International Congress on Sound and Vibration, University of Adelaide, SA, 15 December 1997 - 18 December 1997
    Conference Papers | 1997
    Ho D; Randall RB, 1997, 'Effects of time delay, order of FIR filter and convergence factor on self adaptive noise cancellation', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at 5th International Congress on Sound and Vibration, University of Adelaide, SA, 15 December 1997 - 18 December 1997
    Conference Papers | 1997
    Randall RB; Gao Y; Ho D, 1997, 'Enhanced envelope analysis of bearing signals using digital techniques', in Jantunen E; Holmberg K; Rao RB K (eds.), Int Cong and Exhibition of Condition Monitoring and Diagnostic Engineering Management, TECHNICAL RESEARCH CENTRE FINLAND, Espoo, Finland, pp. 233 - 242, presented at International Cong and Exhibition of Condition Monitoring and Diagnostic Engineering Management, Espoo, Finland, 09 June 1997 - 11 June 1997,
    Conference Papers | 1997
    Randall RB, 1997, 'Developments in digital analysis techniques for diagnostics of bearings and gears', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at 5th International Congress on Sound and Vibration, University of Adelaide, SA, 15 December 1997 - 18 December 1997
    Conference Papers | 1996
    Randall RB; Gao Y; Ford RA, 1996, 'A comparison of time-frequency distributions applied to bearing diagnostics', in Australasian Congress on Applied Mechanics, Australasian Congress on Applied Mechanics, Melbourne, presented at Australasian Congress on Applied Mechanics, Melbourne, 21 February 1996 - 23 February 1996
    Conference Papers | 1996
    Randall RB; Gao Y, 1996, 'Masking effects in digital envelope analysis of faulty bearing signals', in Int Conference on Vibrations in Rotating Machinery, International Conference on Vibrations in Rotating Machinery, Oxford, England, presented at International Conference on Vibrations in Rotating Machinery, Oxford, England, 09 September 1996 - 12 September 1996
    Conference Papers | 1996
    Randall RB; Ren Y; Ngu HK, 1996, 'Diesel engine cylinder pressure reconstruction', in Int Conference on Noise and Vibration Engineering, International Conference on Noise and Vibration Engineering 1996, Leuven, Belgium, presented at International Conference on Noise and Vibration Engineering 1996, Leuven, Belgium, 18 September 1996 - 20 September 1996
    Conference Papers | 1995
    Molla-Hosseini M; Kerr RM; Randall RB; Platfoot RB, 1995, 'An inspection model with minimal and major maintenance for a flexible manufacturing cell using generalized stochastic petri nets', in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), pp. 335 - 356,
    Conference Papers | 1995
    Randall RB; Li YW, 1995, 'Diagnostics of planetary gear bearings in the presence of gear vibrations', in 2nd International Conference Gearbox Noise etc, MECHANICAL ENGINEERING PUBL, London, England, pp. 73 - 80, presented at 2nd International Conference Gearbox Noise etc, London, England, 16 November 1995 - 17 November 1995,
    Conference Papers | 1995
    Sweeney PJ; Randall RB, 1995, 'Sources of gear signal modulation', in 2nd International Conference Gearbox Noise etc, MECHANICAL ENGINEERING PUBL, London, England, pp. 183 - 198, presented at 2nd International Conference Gearbox Noise etc, London, England, 16 November 1995 - 17 November 1995,
    Conference Papers | 1993
    Tordon MJ; Randall RB, 1993, 'Evaluation of cushioning properties of closed-cell plastic foams', in National Conference Publication - Institution of Engineers, Australia, pp. 95 - 101
    Conference Papers | 1990
    Randall RB; Kelly DW, 1990, 'Analytical and experimental vibration analysis of a gearbox casing', in National Conference Publication - Institution of Engineers, Australia, pp. 68 - 72
    Conference Papers | 1990
    Randall RB; Luo D, 1990, 'Hilbert transform techniques for torsional vibration analysis', in National Conference Publication - Institution of Engineers, Australia, pp. 122 - 126
    Conference Papers | 1984
    Randall RB, 1984, 'COMPUTER AIDED VIBRATION SPECTRUM TREND ANALYSIS FOR CONDITION MONITORING.', pp. 86 - 97
    Conference Papers | 1984
    Randall RB, 1984, 'SEPARATING EXCITATION AND STRUCTURAL RESPONSE EFFECTS IN GEARBOXES.', in I Mech E Conference Publications (Institution of Mechanical Engineers), pp. 101 - 107
    Conference Papers | 1983
    Bradshaw P; Randall RB, 1983, 'EARLY DETECTION AND DIAGNOSIS OF MACHINE FAULTS ON THE TRANS ALASKA PIPELINE.', in EARLY DETECTION AND DIAGNOSIS OF MACHINE FAULTS ON THE TRANS ALASKA PIPELINE., pp. 7 - 17
    Conference Papers | 1981
    Randall RB, 1981, 'NEW METHOD OF MODELING GEAR FAULTS.', in American Society of Mechanical Engineers (Paper)
    Conference Papers | 1980
    Randall RB, 1980, 'NOISE SOURCE IDENTIFICATION IN RECIPROCATING MACHINES.', in International Congress on Acoustics